Our Projects

A public-works steel package fabricated and craned into place, including an evening set to hold the schedule.

Roughly 1,400 linear feet of galvanized guardrail fabricated around concrete as it was poured.

An exterior steel staircase and handrail detailed to suit a Paso Robles winery.

Field conditions didn't match the drawings, so we verified and adjusted on site before welding.

Worn pins and ears rebuilt to factory tolerance so the bucket went back to work.

Custom steel entry gates built for fit and operation, then set and tested on site.

A heavy steel staircase maneuvered through tight backyard access and set in place.

ADA-compliant ramp railing built to code and fit to the finished ramp and landings.

A steel frame built to carry glass panels and a wood handrail cleanly.

Welded steel deck railing with a tensioned cable infill, built code-compliant.

Four structural columns set clean by confirming anchor-bolt layout before fabrication.

Steel staircase railing detailed to the stair geometry and finished clean.

Beams and frame craned into position for a GC, coordinated around tight site access.

Custom steel handrails field-fit to finished stone steps and landings.

A custom steel pergola fully welded, erected on site and finished ready for paint.

A custom steel shade structure sized and set for a working commercial yard.

New bucket ears cut on the CNC plasma table, welded to spec and pinned for field use.

A skeleton bucket built to spec for the machine and the application.

Custom steel balconies fabricated and set to a new-construction structure.

A cracked compactor ground out and welded on site to keep the machine in service.

Black steel and cable handrail matched to a modern custom-home interior.

Prefab mezzanine structure and custom stainless steel floor plates installed for Marcus Building Systems.